How to use solar energy in commercial buildings? Practical guide, advice
Solar energy can be converted into thermal energy using a solar collector, while solar panels or solar panels must be used to convert solar energy into electricity touch screen signage. By installing solar panels and solar collectors, you can gain independence from volatile energy prices and are more environmentally friendly and sustainable by replacing fossil fuels with solar energy, thus generating less CO2 emissions.
Make a commercial building more economical and ecological. Surely, it will bring happiness to society involved in ecology, and it is possible. More and more commercial buildings follow the curtain wall principle. This curtain is made up of photovoltaic solar panels in one or more facades of a shopping center. In principle, this improves the energy efficiency of the building while fully respecting nature.
A frame curtain wall
The purpose of a photovoltaic installation is to convert solar radiation into electricity. You have to choose the type of curtain wall to install: it is the archetype of the curtain wall system. This type of wall usually consists of anchors, mullions, transparent panes and profiled plates made of metal. It is used as the exterior cladding of a modern building, such as mini skyscrapers.
A panel curtain wall or structural glazing curtain wall
They are prefabricated curtain walls that are mounted directly on the facades of a commercial building. Aluminum mullions, spandrel panels and insulating glass panes are mounted at the same time in a prefabricated frame. It saves time and costs in the construction of the electrical plan of a building. Using the same components as frame curtain walls, these types differ from the former in the vertical joint arrangements without overlap. Welded between the insulating panes, these joints are watertight and provide a smoother appearance for commercial buildings. Therefore, these facilities are more focused on design combining high efficiency, highly recommended.
Benefits of installing solar power in commercial buildings?
A building using solar electricity naturally benefits from permanent cover against increases in the cost of commercial electricity. It makes it possible to stabilize expenditure linked to energy consumption. On the other hand, these installations require very little maintenance and access to the facade or roof of buildings facilitating rare maintenance. Finally, using solar energy for a commercial building also helps to improve the image of the company vis-à-vis the surrounding community, which constitutes an important lobby.
Tips before installing a curtain wall for a shopping center
In general, the photovoltaic installation in a commercial building implies compliance with the electrical standards of a building of this type and this is done with a qualified electrician. The co-actors: the owner of the building, the building’s electricity company supplying the solar materials and the electricity grid manager must work in synchronization. A correlation must be agreed between the three partners to acquire an installation authorization.
This is especially true in this time of universal concern for environmental and energy problems. If classes at school do not start in the morning, but somewhat later, then it is possible to more effectively use the solar energy coming directly through the windows, while using the thermal inertia of the building. This will provide an opportunity to heat classrooms with windows facing east and south with solar radiation on a cloudless morning before classes begin. This activity will also ensure a more efficient use of thermal energy from solar radiation, which accumulates during the day from the time not earlier than an hour or two after sunrise.